Overview
The Fivespot, a next generation Intelligent Mobile Hotspot, offers the ability to connect up to five Wi-Fi enabled devices to the Internet at once. With the press of a button, notebooks, netbooks, tablets, cameras, gaming devices and media players are all connected to Verizon Wireless's 3G data network or to any of ZTE's global roaming partners' networks in more than 200 countries (including more than 130 countries with 3G speed!
Tec Spec
Size: 2.11” x 3.92” x 0.44”
Weight: 2.82 oz
Usage Time: Up To 300 Minutes
Standby Time: Up To 8 Hours
Max. devices supported: 5 WiFi-enabled devices
Compatibility: Global Ready for use in over 220 countries,Pre-installed SIM Card,Type A USB Port compatibility
Messaging: 2-way Text Messaging
Systems supported: Windows 7 & Windows Vista compatible
WiFi standard: 802.11 b/g
GPS: GPS/LBS Support
Battery & Power: Standard Lithium Ion Battery,Travel Adapter/USB Cable
Support: VZ Access Manager and User Guides on Device,Global Support Kit
Product support
DOWNLOAD
Verizon Fivespot user manual.zip
Fivespot End User Update Tool (v1.0.0B10).exe
FAQ
How to know the 3G network?
Green solid - Device is in 3G coverage.
LED off - Device is not in 3G coverage.
How to know the Wi-Fi signals?
Green solid - Wi-Fi is active.
LED off - Wi-Fi is off.
How to know the signal strength?
Red solid - Signal is weak.
Green solid - Signal is good.
What are the battery indicators?
Red solid - Battery is low.
Green blinking - Charging.
Green solid - Volume of battery is high.
What are the security modes?
OPEN: You can authenticate successfully with a SSID, whether it is valid or empty.
SHARED: The WLAN clients who have the same WEP key with wireless gateway can pass the authentication and access the wireless network.
WPA-PSK: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase of at least 8 characters.
WPA2-PSK: It is the securer version of WPA with implementation of the 802.11i standard.
WPA Algorithm: TKIP, AES or AUTO. Pass phrase: You can input a pass phrase encryption key (8~64 bytes).
Encrypt Type: Set the encrypt type.
WEP Keys: At most four keys can be set in the blank. Choose the primary key index. The primary key is the only key in use at a given time. Whatever keys you enter for an access point, you must also enter the same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, etc. A WEP is either 10 or 26 hexadecimal digits (0~9,a~f and A~F)based on whether you select 64 bits or 128 bits in the Encryption Strength drop-down list.
What are three connection modes?
1. Auto Connect (Domestic Only): When registered on CDMA/EVDO network of the United States, the device will automatically connect to WAN when it is powered on.
2. Auto Connect (GlobalAccess Mode): The device will automatically connect to WAN when it is powered on no matter on which network it is registered.
3. Manual Connect: Connect/Disconnect to Internet manually. Click Apply to confirm your configuration.
How to use the Fivespot in Wi-Fi mode outside U.S and Canada?
Follow the same instructions as the Connecting your device via Wi-Fi (no USB cable) section.
How to use the device outside of the U.S and Canada?
Using the Fivespot in USB mode:
1. Ensure VZAccess Manager and activation are complete per "The Basics" section prior to leaving the U.S.
2. Ensure the SIM Card is inserted into the Fivespot.27ICS
3. Launch VZAccess Manager, if not already running.
4. A message appears to confirm your wireless device. Click Yes. VZAccess Manager now searches for a network (may take a few minutes).
5. Verify that you are in a suitable coverage area. Click Options tab, select Test WWAN device.
6. Select VZGlobal�� link in the Wireless Networks window. Double click on this or click Connect. The word Connected appears at the bottom left of the VZAccess Manager window when a connection is established. If not within coverage, a No Service message appears. Please ensure you are in a suitable coverage area. For other issues refer to the troubleshooting section of the VZAccess Manager User Guide.
How to check approximate data usage?
You can check your approximate unbilled monthly data usage for your Fivespot though the following options:
* With the Fivespot connected to the computer via USB cable, in VZAccess Manager, click the "Usage" button.
* Log on to My Verizon or My Business Account.
How does the Fivespot sWorks?
• Open VZAccess Manager.
• Connect the Fivespot to your computer with the USB cable.
• Power on your PC-integrated Wi-Fi adapter.
• In VZAccess Manager, select Verizon Wi-Fi Access under Available Network, select Connect Wi-Fi.HE BASICS
• Launch your web browser, email application or other Internet application. Visit verizonwireless.com/wi-fi for more details and hotspot locations. You can also search for nearby Wi-Fi locations within VZAccess Manager. Customers with Prepaid Mobile Broadband Plans are not eligible for Verizon Wi-Fi access. Verizon Wi-Fi not available on notebooks running MacR OS. Verizon Wi-Fi hotspots are not owned or operated by Verizon Wireless. Verizon Wireless is not able to estimate upload or download speeds at these locations. Customers are responsible for providing security measures for their computers and data. Many Wi-Fi hotspots are not secure. Customers should connect to the Mobile Broadband network when more security is needed.
How to connect your Wi-Fi enabled device to the Fivespot?
1. Use your normal Wi-Fi application on your computer to establish a connection to your device.
2. Look for the network (SSID) named "Verizon AC30 XXXX." printed on the back of your Fivespot. The final 4 characters are Unique to your device.
3. Click Connect and enter the default password printed on the back of your Fivespot and on the device connect instruction card. The password should be the same. To configure the Fivespot using the Web user interface, go to http://192.168.0.1 (username and password are both "admin"). For details on how to configure the Fivespot with the Web user interface, see the Fivespot Product User Manual on your device.
How to connect the device via Wi-Fi (no USB Cable)?
Ensure the power is off and that the USB cable is NOT connected to the computer. The following should occur after you press and hold the Power button:
• Your device is powered on and the Signal icon lights up.
• Once your device is powered and has been activated, it automatically connects to the Internet, provided that Mobile Broadband service is available.
• The on the device lights solid green to indicate the device is in service and ready to connect.
How to unplug the device when connected with the USB cable?
1. End your Internet session by selecting Disconnect from VZAccess Manager.
2. Exit VZAccess Manager.
3. Simply pull the USB cable from your computer and press and hold the POWER button to power off your Fivespot.
How to Connect the device with the USB cable?
When you connect using the USB cable and then power ON the Fivespot, the following should occur:
• The turns on (green).
• If you are in 3G coverage, the 3G icon will turn green.21S
• Launch VZAccess Manager (if not open already) to connect to Mobile Broadband.
How to install this model in Macintosh?
1. Turn on your computer and close all applications. Make sure your Fivespot is off.
2. Insert the USB cable into the Mini USB port on your device and the other end into the USB port of your computer.
3. To turn your Fivespot on, press and hold the Power button until the signal icon is lit. The VZAccess Manager CD icon appears. Click to open and select VZAccess Manager to launch the installer. Follow the on-screen instructions to install the software and drivers. After the installation is complete, your Mac will re-start.19HE BASICS
4. Launch VZAccess Manager. The first time you launch VZAccess Manager the VZAccess Manager Setup Wizard appears. Following the on-screen instructions to configure the device. When prompted select USB Modem as device type.
5. Select Verizon Wireless --VZAccess from the available networks and select Connect WWAN. Follow the onscreen prompts.
6. If your device was not activated prior to installation of VZAccess Manager, the software will connect to the Verizon Wireless activation website. Follow the on-screen instructions to complete the activation.
7. Setup is now complete.
How to install this model in windows?
1. Turn on your computer and close all open applications. Make sure your Fivespot is off.
2. Insert the USB cable into the Mini USB port on your device and the other end into the USB port of your computer.
3. To turn your Fivespot on, press and hold the Power button until the signal icon is lit. VZAccess Manager Installer launches and the device drivers automatically install (this may take a few moments). If VZAccess Manager does not automatically install, go to Start >My Computer and click to open the CD-ROM drive with the Verizon Wireless icon. Double click on setup.exe and wait a few moments for the software and drivers to automatically install.
4. Launch VZAccess Manager. The first time you launch VZAccess Manager, the Setup Wizard appears. Follow the on-screen instructions to configure the device. When prompted select Auto Detect or USB Modem as device type.
5. Select Verizon Wireless --VZAccess from the available networks and select Connect WWAN. Follow the onscreen prompts
6. If your device was not activated prior to installation of VZAccess Manager, the software will connect to the Verizon Wireless activation website. Follow the on-screen instructions to complete the activation.
7. Setup is now complete.
How to install the SIM card?
1. Remove SIM Card from the outer card, being careful not to touch the gold contacts.
2. Remove the battery cover from your wireless device. Remove the battery. Hold the card with the Verizon Wireless/Vodafone logo facing you and the gold contact points properly aligned with the SIM Card slot.9
3. Insert SIM Card into the slot. The SIM Card may remain in the wireless device permanently once installed (No need to remove).
How to charge the battery?
1. Open the battery compartment, located on the bottom of the device.
2. Insert the battery by lining up the gold contact points on the battery with the gold contact points in the battery compartment.
3. Once the battery is secure, place the battery cover back on the device until it locks into place.
4. Connect the Mini USB end of the AC wall charger to the Mini USB port on the device.
5. Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge at least 5 hours to ensure a full initial charge.
6. You are now ready to install VZAccess Manager and the drivers. In order to install VZAccess Manager and activate the device, you must use the USB cable (included).
What are the operating systems supported by this model?
Windows XP (SP3 or higher), Windows Vista (32bit/ 64bit SP1 or higher), Windows 7, MAC OS X 10.4 or higher.
What are the features available in this model?
Advanced embedded antenna design for mobile Broadband and Wi-Fi
. VPN capability
. Auto installation and connectivity options
. 2-Way Short Messaging Service (SMS) (VZAccess Manager only)
. GPS/LBS support
What is meant by Global Access?
Global Access, an extension of Mobile Broadband service, is a high-speed global remote access service available in more than 200 countries; more than 105 with 3G speed, providing a notebook connection to the Internet, corporate intranet and email abroad.
Source : http://www.zteusa.com
No comments:
Post a Comment